Browse By Brand
Select a brand to view products and solutions.
Increasingly, facility and sustainability managers are looking for ways to understand and monitor their water operations, improve inefficiencies, and address equipment problems and wasteful behavior. Sub-metering throughout a facility, property, or campus empowers personnel to make more knowledgeable decisions for more efficient use of valuable fluid resources.
The AquaCUE® Flow Measurement Manager brings a new level of optimizing information to light. Its intuitive software suite with targeted advanced metering analytics, combined with proven cellular communication technologies, enables greater visibility and control over water resources. The system puts interval meter data to work to address demands for actionable intelligence and improve operations. Cellular endpoints minimize the need for complicated infrastructure and are pre-programmed to automatically broadcast hourly meter reading and event data to the system software. This information helps identify potential leaks and other anomalies in water use. The customizable dashboard delivers information set per individual requirements.
Automotive Oval Gear
This family consists of Oval Gear technology with electronic field serviceable and replaceable registers. Automotive Oval Gear meters are used for brake fluid, wiper fluid and anti-freeze applications. The transmitter register provides a reliable interface to many inventory management systems.
Badger Meter offers the Blancett® family of turbine flow meters to measure everything from water in hydraulic fracturing and mining operations to gases and liquids from wellheads, plus various fluids in sanitary environments. Our turbine meters deliver accurate, consistent, reliable and informative flow measurements for liquid and gas applications.
Compatible with most low-viscosity liquids and natural gas, Blancett meters are suitable for a wide variety of applications in upstream oil and gas, food and beverage, petrochemical, semiconductor, and irrigation. The meters provide cost-effective solutions for general area, hazardous area or 3-A sanitary applications.
The RCT1000 Coriolis mass flow meter identifies flow rate by directly measuring fluid mass over a wide range of temperatures with a high degree of accuracy. For fluids consisting of two liquids or a liquid with suspended solids, this system can derive the concentration and mass of each fluid based on the density measurement. The unobstructed, open-flow design makes it suitable for a variety of fluids, such as slurries and other viscous, nonconductive fluids.
Cox® Precision metering products by Badger Meter provide flow measurement solutions for the test and measurement market and precision industrial applications. Cox Precision flow meters have been an icon of turbine flow meters since their development in the early 1940s. Each model presents a unique solution for a wide variety of precise flow measurement applications.
Dynasonics ultrasonic meters measure flow rate by propagating ultrasound waves into liquid-filled pipes and measuring the reflections. There are two technologies to choose from based on the fluid properties—transit time and Doppler. With clamp-on technology, these ultrasonic meters reside outside the pipe and bring you flow measurement with many benefits including reduced installation costs, uninterrupted production, installation flexibility across a wide range of pipe sizes, no pressure head loss, no contact with internal liquid and no moving parts to maintain.
Flo-tech has been a leading brand of portable testers and turbine meters for hydraulic fluids for over 45 years. Over the years, the Flo-tech tester line has undergone a progression of design changes that have enhanced its operational features while maintaining the rugged dependability of that first tester. Continuing with that tradition is the Flo-Check® USB Hydraulic System Analyzer and the MC4000, the next generation of hydraulic test equipment. The tester line includes three additional models: PFM6, PFM8 and Sensor Array. In addition to the hydraulic testers, Flo-tech also offers a full line of turbine flow sensors in four models including: Activa, Ultima, Classic, and Quad.
Flow Dynamics® is a manufacturer of high-precision flow meter calibration services and equipment.
As the leading manufacturer of hydraulic and pneumatic flow measurement solutions, the Hedland product line features over 18,000 in-line variable area flow meters (sometimes referred to as rotameters) to measure petroleum-based fluids, water-based fluids, water, phosphate esters, pressurized air and other compressed gases.
Hedland flow meters, flow switches and test kits provide a quick, visual flow indication on an easy-to-read linear scale to confirm that flow circuits and on-machinery hydraulic or pneumatic systems are operating properly. Additionally, Hedland MR Transmitters present flow rate and totals on a digital display, with the ability to transmit data via analog signal to remote locations. With models available for standard, high-temperature and corrosive applications, Hedland products are perfectly suited for the most demanding applications in fluid power, oil and gas, automotive, semiconductor, mining and discrete manufacturing. Standard products have a choice of aluminum, brass or stainless steel bodies, while the EZ-View products have various end fitting materials and polysulfone bodies to deliver cost-effective solutions for applications based on fluid compatibility, temperature and pressure.
High Resolution Encoders
Badger Meter offers the latest innovations in high resolution encoder technology with the release of the HR-E® LCD and HR-E encoders. Our high resolution encoders provide utilities with much more than just a reading. Whether you choose the 9-digit LCD or the 8-dial HR-E encoder, the high resolution encoded output provides leak detection and other critical information through the reading system. High resolution encoders utilize the industry standard communication protocol and do not require programming or setting adjustments during installation or wire repair. Through a unique sealing process that eliminates gaskets, Badger Meter encoders are built to withstand harsh environments including flooded pits.
Badger Meter Impeller products and water flow sensors are used to measure liquids in a variety of industrial and commercial markets. These insertion and inline impeller meters serve a wide range of markets including irrigation, HVAC, energy management, water treatment, firefighting apparatus and general industrial. Additionally, Badger Meter manufactures and markets BTU monitors and transmitters that are compatible with virtually all energy management systems. Data acquisition and data management systems are also offered either by direct wire connections or via a wireless network technology.
Industrial Oval Gear (IOG)
Badger Meter Industrial Oval Gear meters are designed to function in applications that require an accurate volume dispensing of water solutions or any other liquid. These products have rugged, shock-resistant plastic covers, similar to those used for power tools, protecting the meters from harsh and demanding environments.
With its rugged design, the Industrial Turbo Meter can withstand the toughest flow conditions. This meter is ideally suited where continuous service and minimal maintenance are required. Our Industrial Turbo series is available in various materials and pressure ratings, and can be combined with our large selection of accessories to suit a wide variety of applications.
An innovator in flow measurement and control products, Badger Meter serves water utilities, municipalities, and commercial and industrial customers worldwide. Measuring water, oil, chemicals, and other fluids, Badger Meter products are known for accuracy, long-lasting durability and for providing valuable and timely measurement data.
Whether it’s improving accuracy, decreasing system maintenance or meeting the demands of challenging liquid conditions, Badger Meter Electromagnetic Meters deliver the performance your critical flow measurement applications require. Our electromagnetic flow meters are designed to achieve ± 0.2 percent accuracy. In addition, the non-intrusive, completely open flow tube design virtually eliminates pressure loss. With no moving parts to impede the flow stream, maintenance is kept to a minimum, even in less than ideal fluid conditions.
Oscillating Piston (OP) meters by Badger Meter are highly accurate and ideal for food, beverage, chemical and other sanitary applications. Combine the OP meter with most Badger Meter mechanical and electronic accessories for applications from batching to inventory control. Maintenance is easy through simple replacement of the piston element.
Preso® differential pressure technology is one of the most proven measuring technologies and Badger Meter has offered these primary flow elements for more than 50 years. Preso meters offer a custom engineered solution specifically manufactured to fit within your system, providing a reliable long-term solution for fluid, steam or gas applications.
Recordall® Disc Series meters are an accurate, cost-effective solution for your metering needs. These positive displacement meters utilize the industry-leading nutating disc technology to drive accuracy and reliability.
The Recordall Turbo Series meters are the smart choice for larger facilities. The direct-coupled turbine uses an exclusive floating rotor design that reduces bearing friction and associated wear to provide greater accuracy and a longer service life.
The Recordall Compound Series meters combine two metering technologies in one innovative package. A positive displacement chamber measures low flow, while a turbine chamber records high flow. These meters are ideal for facilities that experience rapid and wide fluctuations in water demand.
Recordall Fire Hydrant meters are ideal for a temporary source of water. The Recordall Fire Series meters (FSMA) and assemblies (FSAA) are ideal for dedicated and multi-use fire service applications.
Research Control Valve (RCV)
Processing plants, research facilities and government agencies worldwide rely on Research Control® Valves from Badger Meter for repeatable performance and durability. Built for applications two inches or smaller, our globe, angle and sanitary valves are integral components in systems ranging from petrochemical processing to pharmaceutical manufacturing.
When you choose Badger Meter Research Control Valves, you are assured a market leader in control valve technology backed by more than 65 years of experience tailoring solutions for exacting field conditions.
Count on us to apply our expertise to create a highly engineered, valve solution custom-designed to match your stringent parameters. When precision means everything—when quality matters most—choose Research Control Valves.
The Vision Turbine Meters comply with the lead-free provision of the Safe Drinking Water Act. The meters are designed for flow measurement of low-viscosity, aggressive and non-aggressive liquids alike, including demineralized water, alkaline solutions, oils, salad oil, fuel/fuel consumption, beverages, water solutions and coolants.
Vortex flow meters are suitable for measuring steam as well as a variety of liquids and gases. As fluid moves across a vortex meter shedder bar, vortices form. The frequency of the vortices shedding is proportional to the fluid velocity.