Star 1 Copy 9Star 1Star 1


The Model 1100 turbine flow meter is the ideal meter for liquid flow measurement both on and off the oilfield. This meter maintains measurement accuracy and mechanical integrity in the corrosive and abrasive fluids commonly found in oil field water flood projects and many industrial applications.


  • Cost-effective solution for turbine flow meter applications
  • Offers long service life in severe operating environments


  • Rugged 316 stainless steel housing and rotor support assemblies with CD4MCU stainless steel rotor
  • Abrasive-resistant tungsten carbide rotor shaft and journal bearings
  • Available in NPT, BSP, Victaulic®, flange, or hose barbed-end connections
  • NIST traceable calibration
  • Integrate electronically with B2800 Flow Monitor, K-factor Scaler, or the F to I/F to V Intelligent Converter Field replaceable repair kits (the kits allow for turbine replacement without loss of accuracy)


Temperature Range
–150…425 °F
Flow Range
0.6…5000 gpm
Pressure Range
Up to 5000 PSI
±1 %
Canadian Registration Numbers
Province CRN
Alberta (ABSA) 0F5539.2
British Columbia 0F5539.21
Saskatchewan 0F5539.23
Manitoba 0F5539.24
Quebec 0F5539.26

Additional Specifications

Chemical, Refining & Petrochemical
Concrete Production
Oil & Gas
Process or Industrial
Water & Wastewater Treatment

Product Resources

Parts, Accessories & Other Options


Converters More Info Less Info

The Blancett Frequency-to-Current (F-to-I) and Frequency-to-Voltage (F-to-V) converters are microprocessor-based devices designed to provide an analog output directly from a Blancett turbine flow meter. The converters measure and calculate the flow rate of a turbine flow meter and produce an analog output representative of that flow rate, in the form of a 4…20 mA or 0…5 VDC signal. If a converter is ordered with a flow meter, the two components ship from the factory calibrated as a system. If the converter is a replacement, the turbine meter's K-factor has changed, or the converter is being used with some other flow meter, then re-programming is possible with an optional Windows®-based software utility. The F-to-I and F-to-V converters were designed for use with Blancett flow meters, but in many cases they may be configured for use with other turbine meters. Please consult factory for details.

Blancett Intellegent Frequency Converter F to I - F to V (SGN-DS-00938-EN) Blancett Overview Brochure (TRB-BR-00252-EN) Blancett Sensor-Transducer F-to-V or F-to-I Active Sensor Manual (SEN-UM-00084-EN) Blancett Signal Conditioner Intelligent Frequency Converter User Manual (SGN-UM-00283-EN) Impeller USB to DIC Converter Manual (CVT-UM-00208-EN)
K-Factor Scaler (Blancett)

K-Factor Scaler (Blancett) More Info Less Info

The K-Factor Scaler converts a low level frequency output (such as the output from a turbine flow meter) into a scaled square wave output signal. This adjustable frequency divider converts or "scales" the turbine meter output into units of measurement needed for a particular application and recognized by almost any data collection device. The K-factor scaler provides an amplified signal, even when a frequency conversion is not required. This signal is more immune to electrical noise and capable of transmission over longer distances than a raw turbine meter output.

Blancett B220-880 and B220-881 K Factor Scaler Manual (SGN-UM-00281-EN) Blancett B220-885 K-Factor Scaler & B220-900 Programming Software Kit Manual (SGN-UM-00282-EN) Blancett K-Factor Scaler Frequency Divider Product Data Sheet (SGN-DS-00937-EN) Blancett Overview Brochure (TRB-BR-00252-EN)
To view some of the resources you will need Adobe Reader

Related Products