{{title}}
Request a quote {{contactOpenText}}

Find a distributor
Our extensive global network of distributors is ready to serve you in your local language at your time zone.

For Europe and Africa

For Asia Pacific

For the United Arab Emirates

Find a distributor
Our extensive global network of distributors is ready to serve you in your local language at your time zone.

For Europe and Africa

For Asia Pacific

For the United Arab Emirates

Series 228PV PVC Tee Industrial Flow Sensors

The PVC Tee industrial flow sensor features a six-bladed impeller design with a proprietary, non-magnetic sensing mechanism. The forward swept impeller shape provides higher, more constant torque than four-bladed impeller designs and is less prone to be fouled by water borne debris. The forward curved shape coupled with the absence of magnetic drag provides improved operation and repeatability, even at lower rates. This is more important where the impeller may be exposed to metallic or rust particles found in steel or iron pipes.

Showing units in {{labelText}}
  • Size Range
    38...70 mm
    1-1/2...4 in.
  • Temperature Range
    1...43 °C
    35...110 °F
  • Flow Range
    1.5...9.14 m/sec
    0.5...30 ft/sec
  • Pressure Range
    Up to 7 bar
    Up to 100 PSI
Request a quote

Higher, more constant torque than four-bladed impeller designs.

Features a closed, six-bladed impeller design, using a proprietary, non-magnetic sensing technology.

  • Low impedance 8V DC square wave signal is transmitted with a frequency proportional to the flow rate.
  • This signal can travel up to 2000 feet between the sensor and the display unit without the need for amplification.
  • All the sensors are supplied with 20 feet of Belden type 9320 (two-conductor shield) cable.


Product Specifications

View & configure CAD/BIM drawings
Showing units in {{labelText}}
  • Rated Temperature (DO NOT EXCEED)
    Operating: 2…43 °C
    Storage: –10…43 °C
    Operating: 35…110 °F
    Storage: 14…110 °F
  • Recommended Design Flow Range
    1.5…9.14 m/sec
    0.5…30 ft/sec
  • Accuracy
    ± 1.0% of full scale over recommended design flow range
    ± 1.0% of full scale over recommended design flow range
  • Repeatability
    ± 0.3% of full scale over recommended design flow range
    ± 0.3% of full scale over recommended design flow range
  • Linearity
    ± 0.2% of full scale over recommended design flow range
    ± 0.2% of full scale over recommended design flow range
  • Transducer Excitation
    Supply voltage = 8V DC min. 35V DC max.
    Quiescent current = 600 uA (typical)
    OFF State (VHigh) = Supply voltage – (600 µ * Supply impedance)
    ON State (VLow) = 1.2V DC @ 40 mA (15 Ω + 0.7V DC)
    Supply voltage = 8V DC min. 35V DC max.
    Quiescent current = 600 uA (typical)
    OFF State (VHigh) = Supply voltage – (600 µ * Supply impedance)
    ON State (VLow) = 1.2V DC @ 40 mA (15 Ω + 0.7V DC)
  • Output Frequency
    3.2…200 Hz
    3.2…200 Hz
  • Output Pulse Width
    5 msec ±25%
    5 msec ±25%
  • Environmental
    IP 68 / NEMA 4X
    Suitable for pollution degree 4 environments
    Suitable for outdoor use above grade, IR version below grade
    Suitable for use in 100% humidity
    IP 68 / NEMA 4X
    Suitable for pollution degree 4 environments
    Suitable for outdoor use above grade, IR version below grade
    Suitable for use in 100% humidity
  • Electrical Cable for Standard Sensor Electronics
    20 feet (6 meters) of 2-conductor AWG 20 with AWG 22 drain wire shielded UL type PTLC wire provided for connection to display or transmitter unit. Rated to 221° F (105° C). May be extended to a maximum of 2000 feet (610 meters) with similar cable and insulation appropriate for application.
    20 feet (6 meters) of 2-conductor AWG 20 with AWG 22 drain wire shielded UL type PTLC wire provided for connection to display or transmitter unit. Rated to 221° F (105° C). May be extended to a maximum of 2000 feet (610 meters) with similar cable and insulation appropriate for application.
  • Electrical Cable for IR Sensor Electronics

     

     

    48 inches (122 cm) of UL Style 116666 copper solid AWG 18 wire w/direct burial insulation. Rated to 221° F (105° C).
    48 inches (122 cm) of UL Style 116666 copper solid AWG 18 wire w/direct burial insulation. Rated to 221° F (105° C).
View all specifications

Market Applications

  • Building Design, HVAC & Plumbing

    Flow instrumentation solutions are a crucial aspect of building design, construction and operation for apartments, hospitals, schools, factories and other facilities. From HVAC and grounds management to plumbing and water services, our meters are specifically designed to provide solutions that are accurate and reliable, even under the most challenging conditions.

    View Solutions
  • Utility Water Treatment & Distribution

    Water and wastewater treatment facilities have the critical job of producing a safe supply of high-quality drinking water. Their operational processes are complex and involve a wide range of flow measurement tasks. These applications demand the highest flow meter accuracy and reliability, as well as long-term stability and a low cost-of-ownership. Badger Meter water treatment solutions meet the challenge and are part of our end-to-end portfolio of products for the water utility industry.

    View Solutions
  • Process & General Industry

    To succeed in a competitive marketplace, manufacturers must deliver the right product on time, every time, as well as capitalize on opportunities for new products, while maximizing uptime and reducing production costs. These manufacturing and processing industries worldwide depend on precise measurement and control technology flow meters. Badger Meter flow meters produce consistently reliable performance to ensure proper blending, custody transfer and signal transmission as well as compliance with international industry standard requirements. Exceptionally durable flow meters and control products help keep production up and running.

    View Solutions

Product Documentation

Filter Documents
Filtered by:
Remove all filters
Document type
{{isTruncated ? openText : closeText}}

Select up to 5 to share via email

Email selected documents ({{data.emailDocs.length}})

You may only share up to (5) via email. Please remove some.

Displaying {{pageRange}} of {{data.totalResults}}

Manuals & Guides Impeller Series 228PV Wireless Flow Sensor System Impeller/Data Industrial {{moreContent}} {{seeAllLabel}} | English
Manuals & Guides Impeller Series 228PV Plastic Tee Type Flow Sensor Impeller/Data Industrial {{moreContent}} {{seeAllLabel}} | English
Product Data Sheets Impeller Series 228PV Tee Type PVC Flow Sensors Impeller/Data Industrial {{moreContent}} {{seeAllLabel}} | English
Product Data Sheets Impeller Series 228PV Wireless Flow Sensor System Impeller/Data Industrial {{moreContent}} {{seeAllLabel}} | English

We’re sorry, your request didn’t return any documents.

Please try again or contact us

Select up to 5 to share via email

Email selected documents ({{data.emailDocs.length}})

You may only share up to (5) via email. Please remove some.

Displaying {{pageRange}} of {{data.totalResults}}

Prev Page
Next Page
We're here to help

Find a distributor
Our extensive global network of distributors is ready to serve you in your local language at your time zone.

For Europe and Africa

For Asia Pacific

For the United Arab Emirates