Yorkshire Water utilise des capteurs intelligents pour sélectionner ses sources d’eau (en anglais)

In 2020, Yorkshire Water introduced a new strategy to address water quality challenges at a treatment works which receives its source water from the peatland catchments in the Area of Outstanding Natural Beauty (AONB) of Nidderdale. The raw water from these upland catchments is naturally rich in organic material, creating conditions that increase the potential for disinfection by-product (DBP) formation during treatment to be close to the permitted levels.

Over previous years, incremental improvements have been made to manage the challenge of treating this raw water, including peatland restoration, additional pre-treatment processes and automatic coagulation control instrumentation. These approaches improved final water quality at the plant, but further steps were required.

To enable source water selection and keep DBP formation potential as low as possible (a primary driver for this project), Yorkshire Water’s Water Quality Strategy team developed a smart source water quality selection program.

Source Water Selection Protocol

Yorkshire Water trialed a process that used low-power, IoT-enabled sensors to identify the raw water sources that were best suited for treatment as any given time. The team hoped that by selecting source water with the lowest potential for DBP formation, they could improve final water quality, and maintain DBP compliance.

In 2021, a pilot study was launched at one of the many reservoirs in the area serving the treatment works to determine feasibility for such a project. The pilot deployed a s‑can uv‑lyser V3, a full UV-Vis spectrophotometer, which measures absorbance across multiple UV wavelengths to provide accurate real-time water quality data.

Figure 2 - Photo courtesy of Yorkshire Water

Following a successful trial, a total of 13 uv-lyser sensors were delivered to Yorkshire Water in 2022, providing the data for an intelligent source selection project.

Water Quality Sensor Configuration and Implementation

For Yorkshire Water, each uv-lyser measures UV254, true color and turbidity—key parameters for tracking organic loading and DBP formation risk. For research and development purposes, two additional UV wavelengths are monitored to help Yorkshire Water better understand seasonal changes in dissolved organic carbon (DOC).

To optimize performance at remote sites, the sensors were deployed without a traditional controller, reducing energy demand and long-term operating costs. All the sensors can be configured and managed using the onboard IoT connectivity.

Figure 3 - the Badger Meter con-cube v3 controller installed at a reservoir in Nidderdale

Although the sensors arrive factory calibrated, Yorkshire Water evaluated site-specific data during the pilot phase and applied minor calibration adjustments to reflect installation conditions. This enables Yorkshire Water to deploy the sensors across the area without having to calibrate each sensor individually. Once validated during commissioning, no further calibration is anticipated, minimizing operational expense.

“This project has delivered a low-cost, low-carbon, high-tech solution to enable a better understanding of the chemistry of organic release from peatland catchments,” said Neil Whitehead, Water Catchment and Production Strategy Manager at Yorkshire Water. “This has helped with optimal selection of raw water sources and supports consistently high treated water quality.”

Figure 4 - the Badger Meter s-can con-cube displaying the UV readings from a s-can uv-lyser

Operational Insights

The operational framework is now well defined, and Badger Meter will be supporting the Yorkshire Water team in the implementation phase next.

This approach will use a simple traffic light system driven by water quality sensor data across the catchment to guide source selection at the treatment works. This proactive system allows Yorkshire Water to choose the water they want to treat, reducing the need for carbon-intensive solutions to a problem that can be resolved in the field by using smart sensors.

By deploying smart, low-power water quality sensors across their catchments, utilities can gain deeper insight into long-term catchment dynamics and achieve more resilient and cost-effective operations.

At Yorkshire Water, water quality monitoring tools help keep DBP formation as low as possible in treated water, deliver a solution that is consistent with their net zero targets and gain a better understanding of the source water changes over time.