Industrial Wastewater & Effluent Compliance
Bespoke Water Quality and Gas Detection Solution Improves Safety and Operations at an Offshore Landfill Facility
Case Study / 7 min read
Prefer to call?
Customer Care representatives are available by phone Monday–Friday, from 9am–5pm CST.
Prefer to call?
Customer Care representatives are available by phone Monday–Friday, from 9am–5pm CST.
Industrial Wastewater & Effluent Compliance
Case Study / 7 min read
An offshore landfill site in Japan needed to make sure that chlorine levels in the wastewater complied with regulatory standards prior to being discharged back into the sea. Due to the hazards associated with chlorine and the risks of exposure, they also needed to maintain a safe working environment for on-site personnel.
Q46H/79PR Total Chlorine Monitor
F12D Toxic Gas Detector
Through the implementation of this real-time water quality monitoring and gas detection solution managers were able to maintain compliance with environmental and health and safety regulations, reducing the risk of contamination and toxic exposure to safeguard the natural marine environment and the welfare of employees.
According to the World Health Organization, many countries lack the systems and resources to correctly manage their waste. This is especially true in densely populated, urbanized regions where restricted land availability limits space for safe waste management facilities.
Severe space constraints in the coastal regions of Japan have led to the development of a number of artificial islands in their bays that act as waste management facilities. These purpose-built islands preserve valuable inland space and, once full, create new land for recreational parks such as Yumenoshima (Dream Island) or offshore renewable energy plants.
These remote facilities reduce pressure on inland sites and limit common landfill impacts such as noise, odor and pollution. However, storm surges, sea level rise and poor management can increase the risk of hazardous waste spills and seawater contamination, threatening aquatic environments.
Offshore landfill sites produce highly contaminated wastewater and leachate (the toxic liquid that drains from the waste) that, without specialist management, can add heavy metals, excess nutrients and bacteria into the ocean. As a result, disinfection is crucial, and strong oxidizing agents such as chlorine are commonly used to treat wastewater on offshore landfill sites. Precise dosing is important for the following reasons.
While chlorine is a hugely effective disinfectant and widely used in offshore applications, it requires careful handling to prevent chemical contamination of marine environments. High levels of residual chlorine in discharged landfill water pose a serious threat to aquatic life and it is imperative that chlorine levels are tightly controlled and carefully managed to maintain the balance of delicate ecosystems.
International bodies enforce strict thresholds for chemical discharges at sea, with organizations such as the International Maritime Organization (IMO) and the OSPAR Commission regulating what can be discharged into the sea. To comply with regulatory guidelines and keep residual chlorine levels within the permitted limits, many offshore facilities choose to install state-of-the-art, real-time water quality monitoring systems that allow proactive wastewater management.
Alongside environmental risks, chlorine presents serious occupational hazards. As a volatile substance, it can evaporate into toxic gas that irritates the respiratory tract, eyes and lungs. Prolonged exposure can be fatal.
Due to the associated health risks, strict workplace exposure limits are in place, with both the Health and Safety Executive in the UK and NIOSH in the USA setting the short-term exposure limits at 0.5ppm over a 15-minute period. Gas detection is strictly required when chlorine is used for water treatment, and offshore landfill sites frequently feature leading-edge gas detection systems that automatically activate if gas levels exceed their pre-set safe levels to safeguard workers against toxic exposure and maintain compliance.
For one offshore landfill facility in Japan, chlorine is integral to wastewater management. Due to the challenges posed by this strong disinfectant, managers at the facility required a dual-purpose water quality monitoring solution.
Within this region, workplace exposure limits for chlorine are legally managed under the Industrial Safety and Health Act (ISHA) and set at 0.5ppm. To comply with this legislation, managers required a gas detection solution that would reduce the risk of exposure and protect on-site personnel from the effects of toxic gas.
Working alongside experts at Badger Meter, managers at the facility chose to install the Q46H/79PR Total Chlorine Monitor and the F12D Toxic Gas Detector. Available through the BlueEdge® portfolio, this leading-edge solution provides unrivalled monitoring and control of both aqueous and gaseous chlorine, delivering a comprehensive and reliable system that optimizes sanitization, provides enhanced environmental and occupational protection and maintains compliance with regulatory guidelines.
The Q46H/79PR Total Chlorine Monitor is a highly versatile online monitoring system designed for the continuous measurement of total chlorine and is well suited for wastewater applications. Requiring no chemical reagents, this solution can optimize operations while lowering routine maintenance costs.
For this particular application, the Q46H/79PR could meet all of the water quality monitoring needs. The onboard PID system allows the correct amount of chlorine to be dosed to a set point, delivering efficient disinfection. The automated system also minimizes the risk of chemical overdosing to reduce consumption and operating costs. Through real-time data analysis, it also provides continuous monitoring of the chlorine levels in the final effluent. If residual levels are too high at the point of discharge, operators can halt the process to prevent contaminated water from entering the ocean.
The F12D Toxic Gas Detector uses smart, hot‑swappable sensors to measure over 60 toxic gases. With internal data logging, optional heated sensor holders, and flexible installation choices, it can meet the needs of almost any fixed-mount toxic gas application. Its patented AutoTest feature automatically checks sensor performance using self‑generated test gas, reducing the need for manual bump tests, cutting maintenance costs, and improving system reliability for enhanced safety and ultimate peace of mind.
For this particular application, installing the F12D in the dosing area allowed managers to make significant improvements to onsite health and safety. The risk of toxic exposure is most likely to occur in the area where chlorine is added to the water, by placing the detector in this area, gas would be detected immediately in the event of a leak, greatly enhancing occupational safety and maintaining regulatory compliance for safe working conditions.
Offshore applications are notoriously complex and require careful management to maintain safety standards and comply with stringent regulations. For this offshore landfill facility, the nature of their operations created significant environmental and occupational hazards, and their monitoring needs were multifaceted. The integration of this BlueEdge water quality monitoring and gas detection solution has provided the necessary tools to meet all of their monitoring needs, delivering a state-of-the-art system that optimizes on-site operations and maintains compliance with environmental and occupational legislation to promote sustainable and responsible practices.
Industrial wastewater streams are complex and highly variable. BlueEdge® delivers near real-time insight into discharge volumes, pollutant loads and gas conditions—enabling early detection of process upsets, improved treatment stability and confident compliance with environmental permits and pretreatment standards.
Prefer to call?
Customer Care representatives are available by phone Monday–Friday, from 9am–5pm CST.