{{title}}
Request a quote {{contactOpenText}}
Contact a Customer Care Representative

We’ll get back to you within 24 hours or the following business day.

Prefer to call?
Customer Care representatives are available by phone Monday–Friday, from 9am–5pm CST.

(800) 616–3837

Contact a Customer Care Representative

We’ll get back to you within 24 hours or the following business day.

Prefer to call?
Customer Care representatives are available by phone Monday–Friday, from 9am–5pm CST.

(800) 616–3837

B14 Gas Alarm Module Receivers

The B14 Gas Alarm Module Receivers are compact electronic modules that provide local alarm, display, and signal retransmission functions for gas detection systems. The modules are designed to accept input from either two, three, or four wire 4-20 mA transmitters located up to 10,000 feet from the receiver. They are ideally suited for use with any of our toxic or combustible gas transmitters.

Showing units in {{labelText}}
  • Parameters
    Acid Gases, Ammonia, Chlorine, Chlorine Dioxide, Formaldehyde, Hydrogen Chloride, Hydrogen Cyanide, Hydrogen Fluoride, Hydrogen Peroxide, Hydrogen Sulfide, Oxygen, Ozone, Peracetic Acid, Sulfur Dioxide
    Acid Gases, Ammonia, Chlorine, Chlorine Dioxide, Formaldehyde, Hydrogen Chloride, Hydrogen Cyanide, Hydrogen Fluoride, Hydrogen Peroxide, Hydrogen Sulfide, Oxygen, Ozone, Peracetic Acid, Sulfur Dioxide
Request a quote

Monitoring Hazardous Gases in Ambient Air

The B14 Gas Alarm Module Receivers are compact electronic modules that provide local alarm, display, and signal retransmission functions for gas detection systems. The modules are designed to accept input from either two, three, or four-wire 4-20 mA transmitters located up to 10,000 feet from the receiver. They are ideally suited for use with any of Badger Meter's series A12, B12, C12, D12, or F12 gas transmitters.

B14 Alarm Receivers are DIN rail-mounted modules that can be supplied in single or multiple-unit enclosures. Gas concentrations are indicated directly in PPM, PPB, percent, or percent LEL with the display range selectable by the user. Each module provides separate caution, warning, and alarm setpoints with LED bar indicators of each alarm point. LED indicators flash on the initial alarm condition and change to steady on when the alarm is indicated.

Modules contain individual alarm relays for each alarm setpoint. However, each relay can be assigned to any setpoint to allow multiple alarm functions at a single alarm point. Relays are configurable for either standard or fail-safe operation and for either latching or non-latching operation. A fourth LED alarm bar and relay are provided to indicate trouble conditions. The trouble alarm and relay will activate on loss of input signal or if the 4-20 mA input drops below a specific value.

Features

  • User selectable concentrations in PPM PPB, percent or percent LEL
  • Modules provide caution warning and alarm setpoints with LED bar indicators
  • Wide range of gases available from the sensor list
  • Loop-powered 4–20 mA, 675 ohms maximum at 24 VDC
  • 12–30 VDC 

Market Applications

  • Environmental Monitoring

    ​Environmental monitoring solutions are designed to protect the world’s most precious resource. Instruments are deployable throughout the network to measure a variety of parameters, collect baseline data and deliver a deeper understanding of trends that enable early event detection and response.

    View Solutions
  • Wastewater Treatment

    Wastewater treatment facilities feature complex operational processes involving a wide range of flow measurement, water quality monitoring and toxic gas detection solutions, designed to conserve water, increase regulatory compliance and safeguard water quality, people and the environment. From individual monitors to multiparameter measurement, our versatile solutions deliver continuous and proactive monitoring for early event detection, odor control, pollution prevention, chemical management and toxic gas detection.

    View Solutions
  • Drinking Water Treatment

    Drinking water treatment facilities have the critical job of producing a safe supply of high-quality drinking water. Complex operational processes demand the highest flow meter accuracy and reliability, as well as long-term stability and a low cost of ownership. Badger Meter water treatment solutions meet the challenge, assisting utility customers with increasing compliance levels, protecting treatment assets and providing opportunities for process optimization using predictive analytics.

    View Solutions
  • Industrial Pre-Treatment

    Industrial pre-treatment is a crucial stage in the water cycle, occurring before wastewater enters municipal treatment facilities. It involves the removal of contaminants, pollutants, and other harmful substances from industrial wastewater streams to meet regulatory standards and protect the environment. This process typically includes physical, chemical, and biological treatment methods tailored to specific industrial processes and pollutants. By effectively pre-treating industrial wastewater, we can safeguard water quality, prevent damage to treatment infrastructure, and ensure the overall health of ecosystems downstream.

    View Solutions

Product Documentation

Filter Documents
Filtered by:
Remove all filters
Document Type
{{isTruncated ? openText : closeText}}

Select up to 5 to share via email

Email Selected Documents ({{data.emailDocs.length}})

You may only share up to (5) via email. Please remove some.

Displaying {{pageRange}} of {{data.totalResults}}

Manuals & Guides | English B14 Monitor System
Specifications | English Series B14 Alarm System
Specifications | English Series B14 Receiver

We’re sorry, your request didn’t return any documents.

{{data.didYouMean[0]}}? Please check your search term.

Please try again or contact us

Select up to 5 to share via email

Email Selected Documents ({{data.emailDocs.length}})

You may only share up to (5) via email. Please remove some.

Displaying {{pageRange}} of {{data.totalResults}}

Prev Page
Next Page
We're here to help
Contact a Customer Care Representative

We’ll get back to you within 24 hours or the following business day.

Prefer to call?
Customer Care representatives are available by phone Monday–Friday, from 9am–5pm CST.

(800) 616–3837